home *** CD-ROM | disk | FTP | other *** search
- Path: fc.hp.com!news
- From: koren@hpsrk.fc.hp.com (Steve Koren)
- Newsgroups: comp.sys.amiga.graphics
- Subject: Re: Cybervision
- Date: 09 Feb 1996 12:25:20 -0700
- Organization: HP Fort Collins Site
- Sender: koren@hpsrk.fc.hp.com
- Message-ID: <oj668dgnvxb.fsf@hpsrk.fc.hp.com>
- References: <695.6610T930T2219@telepost.no>
- NNTP-Posting-Host: hpsrk.fc.hp.com
- In-reply-to: jornilse@telepost.no's message of 6 Feb 1996 16:19:42 GMT
- X-Newsreader: Gnus v5.0.9
-
-
- jornilse@telepost.no (J°rn Ove Nilsen) wrote:
-
- > new mode in screenmode preferences, but when I start CVMode, I have a big
- > list of 17 resolutions. I can't open a test screen from CVMode either. An
- > error message like this comes up instead; Can't open testscreen!
-
- CVMode is terrible. I can manage to open a test screen if I run it with
- the ADVANCED option and specify my board using the BOARD option.
- Otherwise, no dice.
-
- CyberGfx is generally a lot nicer than the old EGS system, but one thing
- EGS had going for it was that its screenmode creator program was much
- better than CVMode. But luckily once you manage to get some useful
- modes set up you don't generally have to mess with it too much after that.
-
- > The card is fabric new, and should not have any defects, I got V2.15 of the
- > software, V1.38 of cybervision monitor driver, buster rev.11 and enough RAM.
-
- The problem is CVMode, not your board, which is probably fine.
-
- - steve
-